Copilot Fx Planetoid Ring Modulator

Planetoid Ring Modulator with 9v battery snap

Custom Copilot Fx Dubscope 8 step

8 Step Dubscope. Toggle to control the sequencer manually or automatic (tap), Toggle for 4 or 8 steps. External CV Sync Jack

Custom Planetoid and Broadcast

Planetoid with a Broadcast: 3 toggles, first one selects carrier control (expression jack or broadcast), 2nd one is for duty cycle (adds more off time on the broadcast to unbalance things a bit) and 3rd toggle is to add trem at the output of the planetoid (the waveform and rate is determined by the broadcast), also the broadcast has an out jack, so you can also sync/control with another device. There were a reversed trs cable with this built, so you can plug the exp out on the broadcast back to the planetoid (imagine the waveform is ramp up), and flip the 1st toggle and you can go from ramp up or ramp down. 9v battery snap was added by request of the user.

Custom Broadcast

Custom Broadcast, there's an exp in jack to plug an expression pedal, the stompswitch selects if the output is an lfo sweep (broadcast) or manual sweep (exp pedal), the extra toggle is to control the ratio multiplier via the exp pedal when the broadcast is in LFO sweep, as soon the stompswitch is pressed the exp then will control the manual sweep. (In the other direction the ratio is controlled via the ratio knob). This one was set up for 10k output.

Custom Dual Broadcast

Dual Broadcast (4 outs, 2 per channel) 4 knobs per channel (range, aux, wave and ratio), stompswitches selects from broadcast lfo modulated output or manual expression sweep (there's a exp in jack on the back) there are 2 stompswitches so you can sweep one channel manually while having an lfo sweep on the other and switch back. The tap tempo (black switch) is universal, but since each channel is independent you can have a square wave at x3, while having a ramp up at x1/2 in the other channel. Multiple outs for multiple fun

Custom Copilot Fx Arrow Airwaves "Abandon's Alibi"

Custom Arrow Airwaves 2, have dual independent fx loop paths, one for the white noise signal and the other for the instrument signal. Expression jack for manual blend.

Custom Dubscope with 8 step sequencer

Dubscope, with a 8 step sequencer, it's only Low Pass filter (no Fuzz), knobs for each steps that sets the rate for the triangle lfo, knob for the Triangle LFO duty cycle.

Custom Copilot Fx Broadcast

The Broadcast is a controller for expression jacks, it changes the parameter back and forth, it has a control for range that sets the overall range of the sweep, there are 6 waveforms (square, sine, sample and hold, triangle, escallonated, ramp up) that sets the way it's going to go back and forth, plus a ratio knob to adjust the tapped rate (x1, x2, x4 and x1/2). The switch on the right is to tap twice the rate you want, and the other is to switch from an exp pedal (which is plugged into the jack on the left), so the user can control the exp parameter manually or let the broadcast do it for him. The broadcast does not produce any sounds and it only works when you plug into an expression jack on a pedal.

Here's a demo of it controlling the frequency parameter on a moog ring mod (note i did the video with the moog, because the user that ordered wanted to substitute his moog ep-2 with the broadcast, so i use it a moog as a proof that it'll work as replacement for the ep-2)

custom work in progress

Some work in progress, the oblivion is a 4 step sequencer, hot mess is a molecule and abandon´s alibi is an arrow airwaves but, it has built in a panner so it goes back and forth mixing original signal with white noise, the rate is tap tempo and has multiple waveforms to go back and forth.

Copilot Fx Mantis II + Caracol

An Octave pedal to rule them all. This is a Mantis II + Caracol + Clean Blend, the interesting thing is that all of them all running in parallel, so you have their separate bypass footswitches plus a master bypass (center), a truly awesome pedal. There´s an extra knob on the caracol to have a filtered fuzz. Rad pedal, it was built around september 2010.

Copilot Fx Molecule with Osc

Molecule, with an extra twist the knob on the side adds oscillation to the filter section, creating some weird rhythmic tones. This was created around September 2010.

Copilot Fx Orbit with Clean Blend

This is an Orbit, with an extra knob to add clean blend (original signal at the in jack) at the output mixed with the orbit tone.This was around august 2010.

Copilot Fx Electric Identity

This is an Orbit with a triangle LFO controlling the Exp Knob and some Octave Down madness. This pedal was build around early 2010.